In the dead of winter, the number one piece of equipment in your house that you don’t want to fail is your heater. When it’s below freezing outside, you will likely be extremely frustrated if your heating system doesn’t seem to be warming the house. So you might try adjusting the thermostat a few degrees warmer. It still doesn’t feel warm enough, so you put it even higher. Suddenly, your house feels like a sauna, so you quickly drop the temperature 10 degrees. If this sounds like something that you normally do, you might actually be causing a problem for your air conditioning and heating in Ocean County.
- You’re not leaving your thermostat at a constant temperature. Your thermostat controls the temperature of the room — not the temperature of the air coming out of your heater. In other words, when you change the temperature from 70 degrees to 75 degrees, you’re not going to make your house get hotter any faster than if you had set it to 72 degrees. And if you’re constantly turning the thermostat up and down, it puts a lot of stress on your system by forcing it to turn off and on, which can cause parts to fail sooner than they should.
- Hot water baseboard heat — You have air in your pipes. If you have been hearing a hissing or gurgling sound coming from your baseboards, or heat is not circulating throughout the room, there is a potential that you have air in your pipes. It is best to have a certified HVAC contractor check out this problem, as there may be other issues.
- Forced hot air heat — You may need a new filter or tune-up. If you have a furnace, one of the first things that you can do if you find that your heater is not working properly is to check the filter and replace it if necessary. If you have already changed the filter recently, then it may be time to call in a professional and give your unit a tune-up to get it working properly again.
If you find yourself in need of heating repair in Brick this winter, leave it to the expert technicians at Care Temp Heating and Air Conditioning. Call today at 855-788-TEMP to schedule a tune-up for your system.